PROMSA is a company of the Cementos Molins Group | Corporate web Site

Telf. Customer service: +34 93-680.60.20

Concrete, pumped, self-levelling ability

 

HAL-PROMSA is the Self-Compacting and Light Concrete that can be pumped.

The use of special additives in its composition allows for a proper pumping of this concrete.

All of which adds to its self-levelling ability and its insulating properties thanks to the use of light aggregate, which makes HAL-PROMSA an innovative product to be used in both, rehabilitation works and new constructions.

 

 

Field of application

  • Rehabilitation of one-way joist slabs.
  • Slabs with decking plate.
  • Screeds
  • Structures that require little weight, without losing resistance.
  • Renovation of old buildings and new constructions.
  • Light and insulating flat roofs.
  • Structures which due to its dimension or location must be pumped.
  • Structures with acoustic and thermal insulation needs.

 

 

Characteristics

  • Strength and lightness. The combination of HAL-PROMSA with an electro-welded mesh turn the block into strong and light concrete.
  • Product traceability. Since it is manufactured in a concrete plant, it is a homogeneous material, its characteristics are constant and controlled.
  • Application. The pumpability, self-compacting and self-levelling ability make for a very efficient application: quick, clean and safe.
  • Reliability. The formulation of the product, and careful application, bring safety.

 

 

Application system

  • Always by specialised teams.
  • If it is well prepared to be pumped, it can also be applied using a cupola or by pouring, based on the requirements of the works and the accesses to the pouring points.
  • Preparation of the surface and placements of levels.
  • Deaerating process, after application.

 

 

Benefits

  • SELF-COMPACTING: It flows until the wished surface is filled due to its own weight. It does not require vibration.
  • SELF-LEVELLING: Ability to self-level obtaining a flat surface at the desired level.
  • PUMPABLE: Capacity to be pumped. Higher performance and quick application.
  • LIGHT: Lower density than conventional concretes. It reduces the load of the structure.
  • THERMAL AND ACOUSTIC INSULATION: Contains light aggregate that provides the insulating capacity.

Technical Characteristics

Maximum size of the aggregate 10 mm
Consistency Liquid (self-compacting)
Dry bulk density 1600 - 2000 Kg/m3
Compressive strenght (28 days)

15.0 - 20.0 Mpa HAL

20.0 - 25.0 Mpa HAL+

Thickness 3-20cm
Environment - General class I / IIa / IIb / IIIa / IIIb / IIIc / IV
Environment - Specific class Qa / Qb / Qc / H / F